Grain-collecting performance

Large capacity and speedy discharging.

High-speed discharging and vibrating guide

Promotes the discharging of crop with a vibrating guide at the bottom of the grain tank for rapid discharging.

Auger flaps and motorized discharge clutch (separately sold options)

Auger flaps that can be used to make fine-tuning adjustments to the discharge direction are available as a separately sold option. When discharging is finished, these flaps are used to close the auger outlet and prevent the spillage of crop. The use of a wireless remote control (separately sold option) can further facilitate operations.

A two-step-folding long auger that can be stored in a compact form and the automatic swing and storage of the auger

This 4.1-meter long auger can efficiently discharge grain to a detached location. The auger itself can be folded up into a compact form, which makes it convenient for performing work in high-walled fields and when it needs to be stored. Simply push a button to activate automatic swing and storage.

Advance full-tank (crop) notice signal

When more than two-thirds of the grain tank is filled with crop,
a light will flash to notify an assistant of this state of affairs.

Auger discharging engine speed alarm

If the engine speed is insufficient when crop is being discharged,
an alarm will sound to facilitate the prevention of clogging.

Safety performance

Backup the work with safety and peace of mind

New component-up feature Mitsubishi original

The threshing cylinder and straw discharging chain opens at the same time. Removal is smoothly carried out in case of clogging.

Simple component lock-release function

Release the component lock simply by operating the forward lever with one hand. Even if an extraneous substance were to somehow become jammed in the machine, the component cover can be easily raised to minimize any damage that would be caused.

External parking brake (separately sold option)

The combine can be stopped even if the operator has gotten down from the driver’s seat.

New emergency shutoff switch

A new emergency engine shutoff switch has been mounted by the threshing part inlet port. This switch merely needs to be pressed in an emergency to immediately shut off the engine and threshing feed chain.

Reaping part left side mirror

This mirror allows the left side of the combine to be reliably checked for safety purposes. It is also useful since it enables the conveyance of crops to the threshing part to be checked.

Lockable fuel cap

The provision of a lockable fuel cap enables fuel to be properly managed.

Divider light

Twin lights are mounted at the front of the combine. The upper light (forward lighting) illuminates the front of the combine while the lower light (work light) illuminates the area around the right divider. Work can be performed with safe feeling even into the evening hours. *The combine cannot be driven on public roads with the lower light (for the right divider) left on.