(i) Power-component up

Open the threshing cylinder and straw-discharging chain at the same time with a motorized mechanism.

(ii) Side-opening the reaping part

The reaping part can be opened without the use of casters.

(iii) Slide-opening the
Rocking-flow plate

(iv) Opening the cutter-switching
plate

The engine part cover can be opened to conveniently allow for daily inspections.

Bush chain

*Used for reaping and conveying actions, the threshing feed chain, and the straw-discharging chain.

Straw-cutting scythe blades

Can be removed and installed on a bracket-by-bracket basis from the top of the threshing part.

Washing the combine by taking
advantage of the automatic
leveling feature

The undercarriage of the combine can be easily washed.

Opening the auger screw cover

Can be easily opened and closed without the use of tools.

Exposing the cutting blades

The cutting blades can be exposed to facilitate maintenance. Both the upper set and lower set of cutting blades can be adjusted.

Front-end fastening the raising
cover

Sedimenter

Side-opening the grain tank

Can be easily opened without a belt.

Removing and installing the
receiving net

The receiving net can be easily removed and installed without the use of tools. Since the latticework is formed with a die-cutting process, it can also be easily cleared of waste straw.

Opening the bottom screws

The base plate for the first and second screws can be easily opened simply by operating the threshing part lever.

Motorized centralized lubrication

All relevant parts can be lubricated with just the press of a button.

Mud pass-through holes on the
back of the cutting blades

Mud pass-through holes have been added to the back of the cutting blades to increase durability.

Opening the engine cover and
the air-cleaner cover

Opening the secondary threshing
cylinder and cover and the first
and second screw cover

The first and second screw cover and secondary threshing cylinder cover can be removed and installed without the use of tools.

Two-piece sprocket

Each drive-train sprocket can be replaced without having to first remove the continuous-track treads.

Grease-up type rollers of crawler

Grease-up type rollers crawler offering superior maintenance performance benefits are utilized.

Super divider sets

SP-6120FS(Main body)

Short-stem kit

Part no. 3659 9760 000

Perforated receiving net A

Part no. 3659 7281 000

Perforated receiving net B

Part no. 3659 7291 000

*Excluding X specifications
K-V6120CMR (main body)

K-V6120MNT (main body)

K-RCVSVCH (main body)

CH98 Work equipment code 31804 10451

Part no. 3659 9750 000

Auger tip 3687 9951 000 work light ASSY
Auger middle 3687 9951 000 work light ASSY
　　　　　　 3687 9960 000 installation kit
Driver’s seat *1053 7432 000 work light
　　　　　　 3687 9970 000 installation kit
　　　　　　 *Excluding X specifications

DMR98S-KIT(main body)

K-V698S(main body)

Part no. 3685 8980 000

S-R98D(main body)

KN-R6108(main body)

KN-R6108R(main body)

Part no. 3687 9900 000

Part no. 3586 2761 000

*Other components are required for
installation.

Part no. 3583 2251 001