Row alignment and turns can be performed effortlessly by a wide forward field of view. Long hours of work can also be undertaken in a relaxed manner by upgraded equipment.
Comprising a camera on the tip of the auger and a back camera, the W Camera System is a standard feature of the cabin specifications for this combine. By configuring the monitor-switching switch to automatic, the angle will automatically switch according to work conditions.
Normally, the feed from the back camera will be shown. It will switch to the feed from the auger-tip camera during the discharging process.
The feed from the auger-tip camera will be shown when the combine is moving forward or during the discharging process and switch to the back camera when the combine is going in reverse.
Comfortable work is supported thanks to the inclusion of such features as an air-conditioning system and CD/radio device.
A door that slides forwards and backwards is included to enable the combine to be boarded even in tight spaces and effectively used in storage locations.
Operate the flaps to make forward/backward position adjustments for the discharging of crop.
Align auger discharge positions from a comfortable stance with a wired remote control. A separately sold wireless remote control allows discharging operations to be easily undertaken by an assistant.
Notification of remaining amount of crop to be discharged When the amount of crop remaining in the grain tank when the discharging of crop is being undertaken falls to a low level, the operator is notified with a beep.
A large-capacity 2000 L grain tank enables a lower discharge count and can be quickly emptied in approximately 90 seconds in a demonstration of highly efficient work. By the form of this straight tank allows ridge edges to be reaped with room to spare.
If the grain tank overflows, the engine will be forcefully shut down to prevent secondary problems from occurring.
The discharging of crop is promoted by vibrating the top of the bottom screw in the grain tank.